Reference Guide

Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC
CMC
STOR1
Message A device arg1 is in an unknown state.
Arguments arg1 = device name
Detailed
Description
The controller cannot communicate with a device. The state of the device cannot
be determined. There may be a bad or loose cable, or a missing device, or a
problem with the driver or firmware.
Recommended
Response
Action
See the storage hardware documentation for information on checking the cables.
Check for problems with any enclosures attached to the system. Verify that the
controller has a supported version of the driver and firmware. Rebooting the
system may resolve this problem.
Category Storage (STOR = Storage)
Severity Severity 2 (Warning)
Trap/EventID 4178
OMSA Event ID 2265
OMSA Trap ID 75300;80300;85300;90300;95300;100300;105300;110300;115300;120300
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔ ✔ ✔ ✔
CMC ✔ ✔* ✔ ✔*
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔* ✔
CMC ✔ ✔*
1694