Reference Guide

Category Storage (STOR = Storage)
Severity Severity 3 (Informational)
OMSA Event ID 2287
OMSA Trap ID 10100
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔ ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔
CMC
STOR0209
Message Unable to monitor or manage SAS components because the initialization sequence
of the devices did not complete.
Detailed
Description
The initialization sequence of SAS components did not complete during system
startup.
Recommended
Response
Action
Do the following: 1) Make sure that the supported versions of the SAS drivers and
firmware are installed. 2) Reboot the system. If problem persists, reinstall Server
Administrator and Storage Services on the managed node to make sure all the
required components are installed.
Category Storage (STOR = Storage)
Severity Severity 1 (Critical)
OMSA Event ID 2314
OMSA Trap ID 10400
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔ ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔
CMC
1657