Reference Guide

Detailed
Description
Lifecycle Controller is not enabled and must be enabled in order for scheduled jobs
to be created.
Recommended
Response
Action
Enable Lifecycle Controller and retry the operation. Lifecycle Controller can be
enabled by using the F2 System Setup by pressing F2 during server startup, then
select iDRAC Settings > Lifecycle Controlller and enable the Lifecycle Controller
feature. Retry the operation after the server restarts.
Category Updates (RED = FW Download)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔
CMC
RED094
Message Updating firmware for arg1 from version arg2 to version arg3 .
Arguments arg1 = component name, arg2 = available firmware version, arg3 = installed
firmware version
Detailed
Description
The firmware for the component identified in the message is being updated to the
firmware version identified in the message.
Recommended
Response
Action
No response action is required.
Category Updates (RED = FW Download)
Severity Severity 3 (Informational)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔ ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC
1557