Reference Guide

Recommended
Response
Action
Make sure that the Chassis Management at Server attribute is set to Monitor and
Configure, and then retry the operation. To set the correct attribute using Chassis
Management Controller (CMC) GUI, navigate to Chassis Overview, then Setup, then
General, and then click on the Chassis management at Server attribute to select the
correct value.
Category Updates (RED = FW Download)
Severity Severity 2 (Warning)
No alerts are applicable for this message
RED087
Message Unable to update the Chassis firmware, Allow CMC Updates Through OS and
Lifecycle Controller is set to Disabled.
Detailed
Description
Unable to update the Chassis firmware because the Allow CMC Updates Through
OS and Lifecycle Controller setting is set to Disabled.
Recommended
Response
Action
Make sure that the Allow CHC Updates Through OS and Lifecycle Controller
setting is set to Enabled, and then retry the operation. Using the iDRAC Web UI,
select iDRAC > Update, click on the Settings tab, select Enabled for the setting and
then click Apply button.
Category Updates (RED = FW Download)
Severity Severity 2 (Warning)
No alerts are applicable for this message
RED088
Message Unable to update the Chassis firmware because an update operation is already in
progress.
Detailed
Description
The Chassis firmware cannot be updated because an update operation is already in
progress.
Recommended
Response
Action
Wait until the current update operation is completed, and then retry the operation.
Category Updates (RED = FW Download)
Severity Severity 2 (Warning)
No alerts are applicable for this message
RED089
Message A Chassis firmware update operation is in progress.
1554