Reference Guide

LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC
RED084
Message Unable to update the Chassis firmware because of an issue in the network
communication between iDRAC and CMC.
Detailed
Description
The Chassis firmware cannot be updated because of an issue in the
communication between iDRAC and CMC.
Recommended
Response
Action
Verify the status of CMC by accessing the CMC and making sure it is functioning
and responding and then retry the operation. For more information about
troubleshooting a CMC issue, see the CMC User Manual. If the issue persists,
contact your service provider.
Category Updates (RED = FW Download)
Severity Severity 2 (Warning)
No alerts are applicable for this message
RED085
Message Unable to update the Chassis firmware, communication with Chassis Management
Controller took more time than expected.
Detailed
Description
The Chassis firmware cannot be updated because communication between iDRAC
and CMC took more time than expected.
Recommended
Response
Action
Verify the status of CMC by accessing the CMC and making sure it is functioning
and responding and then retry the operation. For more information about
troubleshooting a CMC issue, see the CMC User Manual. If the issue persists,
contact your service provider.
Category Updates (RED = FW Download)
Severity Severity 2 (Warning)
No alerts are applicable for this message
RED086
Message Unable to update the Chassis firmware, Chassis Management at Server is not set to
Monitor and Configure.
Detailed
Description
The Chassis firmware cannot be updated because the Chassis Management at
Server (CMAS) attribute is incorrectly set. The CMAS attribute must be set to
Monitor and Configure on the CMC in order to update CMC firmware from and
iDRAC.
1553