Reference Guide

Category Audit (RDU = Redundancy)
Severity Severity 3 (Informational)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC ✔* ✔*
RDU8518
Message CMC arg1 : active CMC arg2 requests Standby CMC to go active state.
Arguments arg1 = slot number, arg2 = slot number
Detailed
Description
The active CMC requests the Standby CMC to go active. If the user did not initiate
this request, review the chassis log for the reason.
Recommended
Response
Action
No response action is required.
Category Audit (RDU = Redundancy)
Severity Severity 3 (Informational)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC ✔* ✔*
RDU8519
Message Unable to communicate with peer CMC arg1 .
Arguments arg1 = slot number
Detailed
Description
The communication between the primary and standby CMCs was lost. This may
occur when the CMC identified in the message is restarting, or a firmware update
operation is in progress. If the issue persists, a failover will occur.
1504