Reference Guide

no other hardware inventory operation was in progress, reboot the iDRAC using
"racadm racreset" command and then retry the operation.
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC
CMC
RAC996
Message Unable to set the object value because the DNS RAC Name object is not
configured.
Detailed
Description
Unable to set the specified object value because the object DNS RAC Name is not
configured.
Recommended
Response
Action
Configure DNS Rac Name using "racadm set iDRAC.NIC.DNSRacName <Name>"
command, and retry the operation.
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC
CMC
RAC997
Message The object DNSDomainFromDHCP cannot be enabled.
Detailed
Description
The DHCP for Domian Name cannot be enabled if IPv4 and IPv4 DHCP or IPv6 and
IPv6 AutoConfig is disabled.
1480