Reference Guide

Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC
CMC
RAC994
Message Unable to run the "jobqueue delete --all" command.
Detailed
Description
The jobs cannot be deleted if they are in one of these states: "Scheduled" or
"Running". However, all jobs in one of these states: "Completed" or "Failed" will be
deleted.
Recommended
Response
Action
To monitor the job status, use the "racadm jobqueue view -i <job ID>", and delete
the jobs one at a time using the "racadm jobqueue delete -i <job ID>" command.
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC
CMC
RAC995
Message Unable to retrieve the hardware inventory.
Detailed
Description
The hardware inventory cannot be retrieved because another hardware inventory
operation may already be in progress or due to an internal error whether or not
Collect System Inventory On Restart (CSIOR) is enabled or disabled.
Recommended
Response
Action
Another hardware inventory operation may already be in progress and must
complete before retrying the operation. If no other hardware inventory operation
was in progress, make sure to enable Collect System Inventory On Restart (CSIOR)
feature, reboot the system, and retry the operation. If CSIOR is already enabled and
1479