Reference Guide

Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC
CMC
RAC1186
Message 1000Mbps speed setting is Read Only and cannot be configured for the iDRAC NIC.
Detailed
Description
Only possible configurations for the DRAC NIC are 10Mbps and 100 Mbps. For
documentation with respect to this setting, refer to the racadm User Guide under
cfgNetTuning group.
Recommended
Response
Action
No response action is required.
Category Configuration (RAC = RAC Event)
Severity Severity 3 (Informational)
No alerts are applicable for this message
RAC1187
Message Invalid Start Time Entered. Unable to start the Remote Diagnostics operation
because the Start Time entered is earlier than the current iDRAC time.
Detailed
Description
The remote diagnostics operation could not be initiated because the Start Time
entered is invalid. It is earlier than the current iDRAC time.
Recommended
Response
Action
Enter a Start Time that is later than the current iDRAC time and retry the operation.
Run the "racadm getractime" command to obtain the current iDRAC time.
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔
CMC
1440