Reference Guide

Detailed
Description
A USB device is attached to the iDRAC and a configuration XML import operation is
in progress.
Recommended
Response
Action
Wait until the configuration XML import operation has completed before
attempting another operation. Verify the status of the configuration XML import
operation by running the RACADM command "racadm jobqueue view".
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC
CMC
RAC1179
Message Unable to complete requested operation because an Type A/A USB cable is
connected to the front panel USB port and the iDRAC is emulating a NIC device.
Detailed
Description
Unable to complete requested operation because a Type A/A USB cable is
connected to the front panel USB port and the iDRAC is emulating a NIC device.
Recommended
Response
Action
To change the USB Management Port mode setting, remove the Type A/A USB
cable from the front panel USB port and change the port mode settings.
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC
CMC
1436