Reference Guide

Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC
CMC
RAC1146
Message Unable to set the SNMPv3 username because SNMPv3 is not enabled for the
specified user on iDRAC.
Detailed
Description
The SNMPv3 username cannot be set because SNMPv3 is not enabled for the
specified user on iDRAC.
Recommended
Response
Action
Enable SNMPv3 for the specified user by running the command "racadm set
iDRAC.Users.<user index>.SNMPv3Enable 1", and then retry the operation.
Category Configuration (RAC = RAC Event)
Severity Severity 3 (Informational)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC
CMC
RAC1147
Message Unable to set the SNMPv3 username entered in the command because the
username is not present or enabled on iDRAC.
Detailed
Description
The SNMPv3 user cannot be set because the user with the entered username for
the SNMPv3 group is not present or enabled on iDRAC.
Recommended
Response
Action
Make sure the specified username is present on iDRAC and enabled, and retry the
operation.
1422