Reference Guide

RAC1059
Message Rollback operation could not be performed because another firmware update job
is running.
Detailed
Description
The requested firmware rollback operation could not be performed because
another firmware update job is running or being scheduled.
Recommended
Response
Action
Wait until the existing firmware update jobs are completed or scheduled before
retrying the operation. To monitor the status of the existing jobs, run the RACADM
command "racadm jobqueue view". If the issue persists, restart the iDRAC and then
retry the operation after the iDRAC has finished restarting.
Category Configuration (RAC = RAC Event)
Severity Severity 3 (Informational)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC
CMC
RAC1060
Message System inventory may not becurrent because the Collect System Inventory On
Restart (CSIOR) feature is disabled.
Detailed
Description
The system inventory information may not be current because the Collect System
Inventory On Restart (CSIOR) feature is disabled.
Recommended
Response
Action
To enable the CSIOR feature, run the RACADM command "racadm set
LifecycleController.LCAttributes.CollectSystemInventoryOnRestart 1". Then restart
the server to cause system inventory information to be collected.
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔
CMC
1396