Reference Guide

LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC
CMC
RAC1057
Message Rollback operation did not complete successfully. The component identifier
specified is not valid or does not have a rollback firmware image available.
Detailed
Description
Rollback operation did not complete successfully. The component identifier
(FQDD) specified in the operation is not valid or does not have a Rollback firmware
image available.
Recommended
Response
Action
Run the RACADM command "racadm swinventory" to see the list of Rollback
firmware images available and the corresponding component identifier (FQDD).
Category Configuration (RAC = RAC Event)
Severity Severity 3 (Informational)
No alerts are applicable for this message
RAC1058
Message Rollback operation did not complete successfully because Lifecycle Controller is
disabled.
Detailed
Description
The requested firmware Rollback operation did not complete successfully because
Lifecycle Controller is disabled.
Recommended
Response
Action
Run the RACADM command "racadm set
LifecycleController.LCAttributes.LifecycleControllerState 1" to enable Lifecycle
Controller, and retry the operation.
Category Configuration (RAC = RAC Event)
Severity Severity 3 (Informational)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC
CMC
1395