Reference Guide

Detailed
Description
The requested RAID storage operation was successfully accepted and now must be
applied by creating a RAID storage configuration job.
Recommended
Response
Action
To apply the configuration operation, create a configuration job, and then restart
the server. To create the required commit and reboot jobs, run the jobqueue
command. For more information about the jobqueue command, enter the
RACADM command "racadm help jobqueue".
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
RAC1041
Message Successfully configured the Automatic Update (autoupdate) feature settings.
Detailed
Description
Successfully configured the Automatic Update (autoupdate) feature settings.
Recommended
Response
Action
No response action is required.
Category Configuration (RAC = RAC Event)
Severity Severity 3 (Informational)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC
CMC
RAC1042
Message Unable to configure the Automatic Update (autoupdate) feature settings. The
required options are either invalid or not provided.
Detailed
Description
One or more required options to configure the Automatic Update (autoupdate)
feature are missing.
Recommended
Response
Action
For more information, view the help details by running the RACADM command
"racadm help autoupdatescheduler".
Category Configuration (RAC = RAC Event)
1386