Reference Guide

Detailed
Description
For any iDRAC user, SNMPv3 authentication protocol can be changed to "None"
only if the SNMPv3 privacy protocol state is set to "None".
Recommended
Response
Action
Change the SNMPv3 privacy protocol state to None using "racadm set
iDRAC.Users.<index>.SNMPv3PrivacyType none", and retry the operation.
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC
CMC
RAC1014
Message The SNMPv3 privacy protocol cannot be configured to AES or DES mode if
SNMPv3 authentication protocol state is set to "None".
Detailed
Description
The SNMPv3 privacy protocol cannot be configured to AES or DES mode if
SNMPv3 authentication protocol state is set to "None".
Recommended
Response
Action
To configure the SNMPv3 Privacy Protocol for a specified iDRAC user, change the
SNMPv3 Authentication Protocol to either MD5 or SHA state using "racadm set
idrac.users.<index>.SNMPv3AuthenticationType <value>".
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC
CMC
1373