Reference Guide

Arguments arg1 = IP address
Detailed
Description
The USB NIC IP address identified in the message cannot be assigned to the
OSBMC device because only Link Local IP address can be allowed.
Recommended
Response
Action
Enter appropriate Link Local IP address, and then retry the operation. For
information about supported IP addresses, refer to the iDRAC Users Guide available
at the support site.
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
RAC0767
Message Unable to assign USB NIC IP address arg1 to the OSBMC device because IP address
setting conflicts with existing network interface IP.
Arguments arg1 = IP address
Detailed
Description
The USB NIC IP address identified in the message cannot be assigned to the
OSBMC device because IP address setting conflicts with existing network interface
IP.
Recommended
Response
Action
Enter an unique IP address for OSBMC USB NIC that is not the same as another
NICs IP address, and then retry the operation. For information about supported IP
addresses, refer to the iDRAC Users Guide available at the support site.
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
RAC0801
Message iDRAC has reset to default settings.
Detailed
Description
iDRAC closes all the existing sessions and all configuration settings are set to
default values. The iDRAC IP address is set to the default static IP address.
Recommended
Response
Action
No response action is required.
Category Audit (RAC = RAC Event)
Severity Severity 3 (Informational)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
1361