Reference Guide

RAC0746
Message Unable to perform virtual disk (VD) operations, because Lifecycle Controller is not
enabled.
Detailed
Description
Unable to perform virtual disk(VD) operations, because Lifecycle Controller is not
enabled.
Recommended
Response
Action
Enable the Lifecycle Controller and retry the operation. To enable Lifecycle
Controller, restart the server. During server startup, press F2 to enter System Setup.
Go to iDRAC Settings -> Lifecycle Controller, select Enable, and save the changes.
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
RAC0747
Message Unable to perform reset configuration on the selected controller, because Lifecycle
Controller is not enabled.
Detailed
Description
Unable to perform reset configuration on the selected controller, because Lifecycle
Controller is not enabled.
Recommended
Response
Action
Enable the Lifecycle Controller and retry the operation. To enable Lifecycle
Controller, reboot the server. During server startup, press F2 to enter System Setup.
Go to iDRAC Settings -> Lifecycle Controller, select Enable, and save the changes.
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
RAC0748
Message The BIOS watchdog timer must be disabled if the Automatic System Recovery
option is enabled.
Detailed
Description
The BIOS watchdog must be disabled if Automatic System Recovery option is
enabled.
Recommended
Response
Action
Make sure the BIOS watchdog timer is disabled before enabling the Automatic
System Recovery option.
Category Configuration (RAC = RAC Event)
Severity Severity 1 (Critical)
1353