Reference Guide

Detailed
Description
Pending operations are created for the selected operations on the selected
physical disk drives.
Recommended
Response
Action
To view the pending operations, click the Pending Operations button.
Category Configuration (RAC = RAC Event)
Severity Severity 3 (Informational)
No alerts are applicable for this message
RAC0694
Message Unable to configure the attributes of the selected controller, because Lifecycle
Controller is not enabled.
Detailed
Description
Unable to configure the attributes of the selected controller, because Lifecycle
Controller is not enabled.
Recommended
Response
Action
To enable Lifecycle Controller, reboot the server. During server startup, press F2 to
enter System Setup. Go to iDRAC Settings -> Lifecycle Controller, select Enable,
and save the changes. Retry the operation after the server has restarted.
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
RAC0695
Message Unable to perform security key operations on the selected controller, because
Lifecycle Controller is not enabled.
Detailed
Description
Unable to perform security key operations on the selected controller, because
Lifecycle Controller is not enabled.
Recommended
Response
Action
To enable Lifecycle Controller, reboot the server. During server startup, press F2 to
enter System Setup. Go to iDRAC Settings -> Lifecycle Controller, select Enable,
and save the changes. Retry the operation after the server has restarted.
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
RAC0696
Message Unable to retrieve the hardware overview information because the server is turned
off.
1332