Reference Guide

RAC0688
Message Applying this configuration operation will also apply all existing pending operations
on the arg1 . #{View Pending Operations link}
Arguments arg1 = controller_name
Detailed
Description
Applying this configuration operation will also apply all existing pending operations
on the controller identified in the message.
Recommended
Response
Action
Click Create Job button to create the configuration job. Click Cancel to quit job
creation.
Category Configuration (RAC = RAC Event)
Severity Severity 3 (Informational)
No alerts are applicable for this message
RAC0689
Message Unable to create a virtual disk on the selected disk drives, because Lifecycle
Controller is not enabled.
Detailed
Description
Unable to create a virtual disk on the selected disk drives, because Lifecycle
Controller is not enabled.
Recommended
Response
Action
To enable Lifecycle Controller, reboot the server. During server startup, press F2 to
enter System Setup. Go to iDRAC Settings -> Lifecycle Controller, select Enable,
and save the changes. Retry the operation after the server has restarted.
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
RAC069
Message Unable to complete the operation because the string length is less than the
minimum supported length.
Detailed
Description
Unable to complete the operation because the string length is less than the
minimum supported length.
Recommended
Response
Action
Enter a string value that is greater than the minumum supported length and retry
the operation.
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
1330