Reference Guide

Detailed
Description
Enabling iDRAC Direct USB Configuration XML allows any USB key containing a
correctly formatted configuration XML file to reconfigure the server when plugged
into the USB management port identified by the wrench icon. This may include
operations on RAID configurations, user accounts, and alert settings.
Recommended
Response
Action
No response action is required.
Category Configuration (RAC = RAC Event)
Severity Severity 3 (Informational)
No alerts are applicable for this message
RAC0683
Message Unable to perform split mode configuration on enclosure(s).
Detailed
Description
Unable to perform split mode configuration on enclosure(s).
Recommended
Response
Action
Check the following: 1) The controller must have Real Time Configuration
Capability and the associated enclosure(s) must have Split Mode Capability in order
to perform the operation. 2)The controller(s) associated with the enclosure(s)
support real time configuration. To verify the controller real time configuration
support, go to the Controller Properties page, select the required controller and
verify the Real Time Configuration Capability value.3)The enclosure(s) supports split
mode configuration. To verify the enclosure, go to the Enclosure Properties page,
select the required enclosure, and verify the Enclosure Split Mode Capability
property value.<br />"
Category Configuration (RAC = RAC Event)
Severity Severity 3 (Informational)
No alerts are applicable for this message
RAC0684
Message Unable to perform split mode configuration on the selected enclosures, because
Lifecycle Controller is not enabled.
Detailed
Description
Unable to perform split mode configuration on the selected enclosures, because
Lifecycle Controller is not enabled.
Recommended
Response
Action
To enable Lifecycle Controller, reboot the server. During server startup, press F2 to
enter System Setup. Go to iDRAC Settings -> Lifecycle Controller, select Enable,
and save the changes. Retry the operation after the server has restarted.
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
1328