Reference Guide

LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC
RAC0680
Message Server iDRAC user credentials and/or BIOS passwords are not currently set to
default credentials. The USB Configuration XML feature is not available unless
default credentials are set.
Detailed
Description
The USB Configuration XML feature is not available if the iDRAC user credentials
and BIOS passwords are not set to default values.
Recommended
Response
Action
Reset the iDRAC user credentials and BIOS passwords to default and retry the
operation.
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
RAC0681
Message Shared component updates through the Server OS or Lifecycle controller cannot
be applied because the CMC setting for Chassis Management at Server Mode is not
set to Manage and Monitor.
Detailed
Description
Shared component updates through the Server OS or Lifecycle controller cannot
be applied because the CMC setting for Chassis Management at Server Mode is not
set to Manage and Monitor.
Recommended
Response
Action
To enable this feature do the following: 1) Launch CMC Web UI. 2) Navigate to
Chassis Overview -> Setup -> General, and select Manage and Monitor option for
the Chassis Management at Server Mode. 3) Click Apply to save changes in CMC. 4)
Retry the operation in iDRAC. For more information, refer to the CMC User Guide.
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
RAC0682
Message Enabling iDRAC Direct USB Configuration XML allows any USB key containing a
correctly formatted configuration XML file to reconfigure the server when plugged
into the USB management port identified by the wrench icon. This may include
operations on RAID configurations, user accounts, and alert settings.
1327