Reference Guide

RAC0649
Message Unable to process the request.
Detailed
Description
Unable to process the request, because data is not entered or not selected in one
or more mandatory fields.
Recommended
Response
Action
Make sure to enter or select data in all the mandatory fields, and then retry the
operation.
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
RAC065
Message iDRAC reset operation was not successful.
Detailed
Description
The iDRAC reset operation was not successful. This may be due to IPMI
communications issues.
Recommended
Response
Action
Do the following: 1) Retry the operation. 2) If the issue persists, remove AC input
power from the server and re-apply AC power to the server and retry the
operation. 3) If the issue constinues to persist, contact your service provider.
Category Configuration (RAC = RAC Event)
Severity Severity 3 (Informational)
No alerts are applicable for this message
RAC0654
Message No operations can be performed on the iDRAC Service Module.
Detailed
Description
Unable to perform operations on the iDRAC Service Module (iSM) because the iSM
is not installed on the server operating system. All fields in the iDRAC GUI iSM page
are disabled.
Recommended
Response
Action
Make sure that the iDRAC Service Module is installed on the server operating
system, and then retry the operation.
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
1316