Reference Guide

Severity Severity 2 (Warning)
No alerts are applicable for this message
RAC0619
Message The iDRAC firmware rollback will cause an iDRAC restart and all current user
sessions will be closed.
Detailed
Description
The message appears in Firmware Rollback page when the iDRAC firmware
rollback action completed successfully.
Recommended
Response
Action
Reconnect iDRAC communications sessions after iDRAC is restarted. The iDRAC
will be ready for login once the restart is complete.
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
RAC062
Message Unable to set the WatchdogResetTime because the IPMI Watchdog state is
disabled.
Detailed
Description
The WatchdogResetTime can not be set if the IPMI Watchdog state is disabled.
Recommended
Response
Action
Enable the IPMI Watchdog state and retry the operation.
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
RAC0620
Message Lifecycle Controller is unable to delete the selected jobs.
Detailed
Description
Lifecycle Controller is currently busy performing tasks. The selected jobs cannot be
deleted until the following: 1) The Lifecycle Controller tasks are completed. 2) The
system completes all the Power-on-Self-test (POST) operations.
Recommended
Response
Action
Wait until Lifecycle Controller completes the current tasks and the system
completes Power-on Self-test (POST).
Category Configuration (RAC = RAC Event)
1305