Reference Guide

Recommended
Response
Action
Enable CSIOR, restart the system and retry the operation. To enable CSIOR, press
F2 (System Setup) during system startup, navigate to iDRAC Settings >Lifecycle
Controller, and select the Enabled option for Collect System Inventory on Restart.
Category Configuration (RAC = RAC Event)
Severity Severity 1 (Critical)
No alerts are applicable for this message
RAC0605
Message There are no jobs to be displayed.
Detailed
Description
There are no jobs to be displayed.
Recommended
Response
Action
No response action is required.
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
RAC0606
Message The network connection test operation was successful.
Detailed
Description
The selected network connection test operation was successsful.
Recommended
Response
Action
No response action is required.
Category Configuration (RAC = RAC Event)
Severity Severity 3 (Informational)
No alerts are applicable for this message
RAC0607
Message Unable to perform OS to iDRAC Pass-Through with the current system
configuration.
Detailed
Description
The integrated NICs in the system do not support OS to iDRAC Pass-Through.
1300