Reference Guide

LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔* ✔
CMC
RAC057
Message Unable to set Privacy Protocol to an enabled state because the Authentication
Protocol attribute is set to None for the user ID: arg1
Arguments arg1 = user ID
Detailed
Description
The Privacy Protocol for the user cannot be enabled because the Authentication
protocol is disabled.
Recommended
Response
Action
Enable the Authentication Protocol attribute for the identified user ID account, and
retry the operation to set the Privacy Protocol to an enabled state.
Category Configuration (RAC = RAC Event)
Severity Severity 3 (Informational)
No alerts are applicable for this message
RAC058
Message AttributeValue is not unique for AttributeName arg1 .
Arguments arg1 = attribute name
Detailed
Description
The value provided for the specified attribute is not unique. For example, the user
name for a user account must be unique.
Recommended
Response
Action
Provide a unique value for the specified attribute. For more information about the
component being managed, see the DCIM Profile documentation.
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
RAC059
Message Unable to configure iDRAC time because Network Time Protocol (NTP) is enabled.
Detailed
Description
When the Network Time Protocol (NTP) feature is enabled, the iDRAC will get time
from the configured NTP server. Directly configuration of the iDRAC time is
disabled when NTP is enabled.
1297