Reference Guide

Detailed
Description
The Authentication Protocol attribute for the user account identified in the
message cannot be disabled because the Privacy Protocol attribute is enabled. The
Privacy Protocol for the user account is not set to None.
Recommended
Response
Action
Disable the Privacy Protocol attribute for the identified user ID account by setting
the value to None, and retry the operation to set Authentication Protocol attribute
to None.
Category Configuration (RAC = RAC Event)
Severity Severity 3 (Informational)
No alerts are applicable for this message
RAC0560
Message RAC Software Initialization Error
Detailed
Description
RAC Software Initialization error. Monitoring data will not be available for PERC and
Network Cards
Recommended
Response
Action
Contact Dell Tech Support
Category System Health (RAC = RAC Event)
Severity Severity 3 (Informational)
Trap/EventID 2531
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔ ✔ ✔ ✔
CMC ✔ ✔ ✔ ✔
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔* ✔
CMC ✔ ✔
RAC0561
Message iDRAC to CMC communication link is not functioning for agent free monitoring of
chassis PCIe slots.
Detailed
Description
iDRAC lost connection with CMC proxy component that enables agent free
monitoring of PCIe slots. Agent free monitoring will not be supported for Chassis
PCIe slots while this connection is not functioning.
1295