Reference Guide

RAC0249
Message One or more partitions are in-use by another process.
Detailed
Description
The vFlash partition is in-use by another process. Therefore, the current operation
cannot proceed.
Recommended
Response
Action
Try the operation after a few minutes. If the problem persists, reset iDRAC and
repeat the operation.
Category Audit (RAC = RAC Event)
Severity Severity 3 (Informational)
No alerts are applicable for this message
RAC025
Message Unable to set values for DNS1 or DNS2 attributes because DNS from DHCP is
Enabled.
Detailed
Description
Unable to set static values for DNS1 or DNS2 when DNS from DHCP is Enabled.
Recommended
Response
Action
Disable DNS from DHCP to set values for DNS1 or DNS2.
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
RAC0250
Message One or more partitions are read-only.
Detailed
Description
The vFlash partitions are read-only. Therefore, the current operation cannot
proceed.
Recommended
Response
Action
Make sure the partitions are writable before attempting to change their contents.
Category Audit (RAC = RAC Event)
Severity Severity 3 (Informational)
No alerts are applicable for this message
1261