Reference Guide

RAC023
Message Unable to enable the User or set values for IPMILan, IPMISerial, or User Admin
Privilege because the User Password is not configured.
Detailed
Description
Unable to enable the User or set values for IPMILan, IPMISerial, or User Admin
Privilege because the User Password is not configured.
Recommended
Response
Action
Set User Password before attempting to enable the other identified attributes.
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
RAC0230
Message This operation erases all data in the SD Card. Do you want to continue?
Detailed
Description
This message is displayed when a confirmation is required to initialize the vFlash SD
Card.
Recommended
Response
Action
Press OK to initialize the SD Card. This will erase all data. If undesired press Cancel.
Category Audit (RAC = RAC Event)
Severity Severity 3 (Informational)
No alerts are applicable for this message
RAC0231
Message This operation erases all data in the partition. Do you want to continue?
Detailed
Description
This message is displayed when a confirmation is required to format the vFlash SD
Card partition.
Recommended
Response
Action
Press OK to initialize this partition of the SD Card. This action will erase all the data
in this partition. If undesired press Cancel.
Category Audit (RAC = RAC Event)
Severity Severity 3 (Informational)
No alerts are applicable for this message
1255