Reference Guide

PWR8678
Message The value of the property arg1 is arg2 .
Arguments arg1 = power property name, arg2 = enable or disable
Detailed
Description
The power property identified in the mesage is changed as identified in the
message..
Recommended
Response
Action
No response action is required.
Category Configuration (PWR = Power Usage)
Severity Severity 3 (Informational)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔
CMC ✔
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC ✔* ✔*
PWR8680
Message The arg1 firmware in the server slot arg2 does not support the storage sled.
Arguments arg1 = iDRAC/BIOS, arg2 = slot number
Detailed
Description
The firmware identified in the message does not support the storage sled.
Recommended
Response
Action
Update the firmware identified in the message to the supported latest available
version. See the latest iDRAC User Guide for information on the versions that
support the storage sled.
Category System Health (PWR = Power Usage)
Severity Severity 1 (Critical)
Trap/EventID 2273
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔* ✔* ✔* ✔*
CMC ✔ ✔* ✔ ✔*
1218