Reference Guide

Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC ✔* ✔*
PWR8655
Message Chassis Management Controller (CMC) is unable to turn on the component arg1 -
arg2 because of insufficient power. The minimum required power is arg3 AC Watts,
but only arg4 AC Watts is available.
Arguments arg1 = component name, arg2 = slot number, arg3 = min power, arg4 = available
power
Detailed
Description
CMC could not successfully turn on the component identified in the message,
because of insufficient power available.
Recommended
Response
Action
Make sure there is sufficient power available, and then retry the operation. To view
the available power, on the CMC Web interface, click Chassis Overview > Power >
Power Budget Status. The available power is displayed in the Total Input Power
Available For Allocation field. To increase available power, add more PSUs or
remove unused components from the Chassis.
Category Audit (PWR = Power Usage)
Severity Severity 2 (Warning)
Trap/EventID 8418
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔* ✔* ✔* ✔*
CMC ✔ ✔* ✔* ✔*
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔* ✔*
CMC ✔* ✔*
PWR8656
Message Chassis Management Controller (CMC) is unable to turn on the component arg1 -
arg2 because of insufficient power.
1208