Reference Guide

Detailed
Description
The virtual reseat initiated on the Sleeve or Sled identified in the message
successfully turned off the component. However, the Sleeve or Sled did not turn
on successfully. A virtual reseat is the same as removing and inserting a Sleeve or
Sled.
Recommended
Response
Action
Retry the virtual reseat operation on the Sleeve or Sled identified in the message. If
the issue persists, manually remove and reinsert the Sleeve or Sled in the chassis.
Category Audit (PWR = Power Usage)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC ✔* ✔*
PWR8577
Message A virtual reseat operation is initiated on Sleeve or Sled arg1 .
Arguments arg1 = slot number
Detailed
Description
A virtual reseat operation is initiated on the Sleeve or Sled identified in the message.
A virtual reseat is the same as removing and inserting a Sleeve or Sled.
Recommended
Response
Action
No response action is required.
Category Audit (PWR = Power Usage)
Severity Severity 3 (Informational)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC ✔* ✔*
1194