Reference Guide

LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC ✔* ✔*
PWR8573
Message The Chassis Management Controller is unable to communicate to the iDRAC,
when trying to turn off the server arg1 .
Arguments arg1 = server id
Detailed
Description
The Chassis Management Controller is not able to communicate with the iDRAC
on the server identified in the message. Therefore the server could not be turned
off. This situation may occur when iDRAC is restarting.
Recommended
Response
Action
Wait for three minutes, and then retry the operation. If the issue persists, remove
and reinsert the server and wait for the iDRAC to finish restarting before retying the
operation.
Category Audit (PWR = Power Usage)
Severity Severity 2 (Warning)
Trap/EventID 8418
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔* ✔* ✔* ✔*
CMC ✔ ✔* ✔* ✔*
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔* ✔*
CMC ✔* ✔*
PWR8574
Message The Chassis Management Controller is unable to communicate to the iDRAC,
when trying to hard reset the server arg1 .
Arguments arg1 = slot number
Detailed
Description
The Chassis Management Controller is not able to communicate with the iDRAC
on the server identified in the message. Therefore the server could not be hard
reset. This situation may occur when iDRAC is restarting.
Recommended
Response
Action
Wait for three minutes, and then retry the operation. If the issue persists, remove
and reinsert the server and wait for the iDRAC to finish restarting before retying the
operation.
1192