Reference Guide

Detailed
Description
The Dynamic Power Supply Engagement feature was not successfully enabled.
Recommended
Response
Action
Restart the Chassis Management Controller and retry the operation. To restart the
Chassis Management Controller, using the WEB UI, go to Chassis Overview >
Power > Control, select the Reset CMC option, and then click Apply.
Category Audit (PWR = Power Usage)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔*
CMC ✔ ✔*
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC ✔* ✔*
PWR8506
Message Cumulative power computation (KWH) time is reset on arg1 .
Arguments arg1 = time
Detailed
Description
Resetting the power computation reading causes the log to report time at which it
is reset.
Recommended
Response
Action
No response action is required.
Category Audit (PWR = Power Usage)
Severity Severity 3 (Informational)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC ✔* ✔*
1156