Reference Guide

Recommended
Response
Action
"1) Review system power policy. 2) Check system event logs for thermal or power
related exceptions."
Category System Health (PWR = Power Usage)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC
PWR2401
Message Power management firmware initialization error
Detailed
Description
The iDRAC controller detected that the power management firmware did not
initialize properly. The system may operate in a performance degraded state.
Recommended
Response
Action
"1) Disconnect system input power, wait one minute, reconnect system input
power. 2) Re-flash system BIOS. 3) Upgrade system BIOS to the latest revision."
Category System Health (PWR = Power Usage)
Severity Severity 1 (Critical)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC
PWR2402
Message iDRAC is unable to communicate with power management firmware.
1150