Reference Guide

PSU8507
Message Insufficient power available because PSU in the slot arg1 is not present..
Arguments arg1 = slot number
Detailed
Description
The PSU identified in the message has been disengaged or removed. Insufficient
power is available.
Recommended
Response
Action
Insert a PSU in the slot identified in the message.
Category Audit (PSU = Power Supply)
Severity Severity 3 (Informational)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC ✔* ✔*
PSU8508
Message arg1 , PSU arg2 firmware update is in progress.
Arguments arg1 = error string, arg2 = slot number
Detailed
Description
Unable to set the Power configuration because the PSU firmware update is in
progress.
Recommended
Response
Action
Retry the operation after the PSU firmware update is completed.
Category Audit (PSU = Power Supply)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
1101