Reference Guide

Detailed
Description
The power supply output voltage is insufficient to keep system operating at a
normal levels.
Recommended
Response
Action
1) Remove the power supply input cord and then remove power supply. 2) Re-
install the power supply and then re-install the power supply cord. 3) If the issue
persists, contact technical support. Refer to the product documentation to choose
a convenient contact method.
Category System Health (PSU = Power Supply)
Severity Severity 1 (Critical)
Trap/EventID 2185
LCD Message Output under voltage fault detected on PSU <number>.
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔* ✔ ✔ ✔ ✔
CMC ✔ ✔ ✔ ✔
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔* ✔ ✔ ✔ ✔
CMC ✔* ✔*
PSU0041
Message An output over voltage fault detected on power supply arg1 .
Arguments arg1 = number
Detailed
Description
none
Recommended
Response
Action
1) Remove the power supply input cord and then remove power supply. 2) Re-
install the power supply and then re-install the power supply cord. 3) If the issue
persists, contact technical support. Refer to the product documentation to choose
a convenient contact method.
Category System Health (PSU = Power Supply)
Severity Severity 1 (Critical)
Trap/EventID 2185
LCD Message Output over voltage fault on PSU <number>. Check PSU
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔* ✔ ✔ ✔ ✔
CMC ✔ ✔ ✔ ✔
1070