Reference Guide

PST0209
Message System BIOS has halted due to Non-Maskable Interrupt (NMI).
Detailed
Description
System BIOS has halted and is unable to continue. System BIOS has detected a
Non-Maskable Interrupt (NMI) which may have been caused by a hardware change.
Recommended
Response
Action
Do one of the following: 1) If new hardware has been added, remove the new
hardware and restart the server, 2) Turn server off and back on using the power
button, or 3) Remove and reapply server input power. If the problem persists,
contact your service provider. Refer to the product documentation to choose a
convenient contact method.
Category System Health (PST = BIOS POST)
Severity Severity 1 (Critical)
LCD Message System halted due to NMI: Check Console for Details
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC
CMC
PST0254
Message General failure after video.
Detailed
Description
System BIOS detected a functional or configuration issue during system POST.
Check the system video screen for more information. The system event log may
contain additional details. This exception occurred early in system power on, thus
the system may not display video. (BIOS POST Exception code FE).
Recommended
Response
Action
Check system video and review event log for additional information.
Category System Health (PST = BIOS POST)
Severity Severity 1 (Critical)
Trap/EventID 2425
LCD Message General failure after video. Check screen message
1055