Reference Guide

PST0193
Message BIOS POST memory test failed.
Detailed
Description
System BIOS POST memory test failed. This exception occurred early in system
power on, thus the system may not display video. (BIOS POST exception code C1)
Recommended
Response
Action
Compare system memory installation to supported system memory configurations.
Reduce system configuration to minimum memory configuration.
Category System Health (PST = BIOS POST)
Severity Severity 1 (Critical)
Trap/EventID 2425
LCD Message BIOS POST memory test failed. Check memory devices
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔ ✔ ✔ ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔* ✔
CMC
PST0194
Message Remote access controller configuration failed.
Detailed
Description
System BIOS could not configure the Remote Access controller This exception
occurred early in system power on, thus the system may not display video. (BIOS
POST exception code C2)
Recommended
Response
Action
Cycle input power and power on the system. If the problem persists, contact
technical support. Refer to the product documentation to choose a convenient
contact method.
Category System Health (PST = BIOS POST)
Severity Severity 1 (Critical)
Trap/EventID 2425
LCD Message Remote access controller configuration failed. Check screen message
1052