Reference Guide

PST0141
Message QuickPath Interconnect (QPI) fatal error.
Detailed
Description
Quick Path Interconnect failed during system POST. Reboot the system. If problem
persists, remove input power and reseat processors. This exception occurred early
in system power on, thus the system may not display video.
Recommended
Response
Action
Reboot the system. If problem persists, remove input power and reseat processors.
Category System Health (PST = BIOS POST)
Severity Severity 1 (Critical)
Trap/EventID 2425
LCD Message QuickPath Interconnect (QPI) fatal error. Contact support
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔ ✔ ✔ ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔* ✔
CMC
PST0142
Message MRC fatal error.
Detailed
Description
BIOS Memory testing failed. Compare system memory installation to supported
system memory configurations. Reduce system configuration to minimum
memory configuration. This exception occurred early in system power on, thus the
system may not display video.
Recommended
Response
Action
Compare system memory installation to supported system memory configurations.
Reduce system configuration to minimum memory configuration.
Category System Health (PST = BIOS POST)
Severity Severity 1 (Critical)
Trap/EventID 2425
LCD Message Memory initialization error. Contact support
1049