Reference Guide

PST0081
Message No bootable devices.
Detailed
Description
System is at F1/F2 prompt because the system BIOS was unable to detect a
bootable device.
Recommended
Response
Action
Make sure a bootable device is attached to the system and enabled in BIOS setup.
If device is attached and enabled, remove and reapply power to server. If the
problem persists, contact your service provider. Refer to the product
documentation to choose a convenient contact method.
Category System Health (PST = BIOS POST)
Severity Severity 1 (Critical)
LCD Message No bootable devices found. Check bootable devices.
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC
CMC
PST0082
Message In BIOS Setup Menu.
Detailed
Description
System is at the BIOS Setup Menu.
Recommended
Response
Action
No response action is required.
Category System Health (PST = BIOS POST)
Severity Severity 3 (Informational)
LCD Message In BIOS Setup Menu.
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔
CMC
1034