Reference Guide

Arguments arg1 = device name
Detailed
Description
The device could not apply some of the configuration settings. This may indicate
configuration changes since the last system inventory or mutually exclusive
settings.
Recommended
Response
Action
Check the current system configuration and ensure all settings are correct. If not,
retry the operation.
Category Configuration (PR = Part Exchange)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC
PR17
Message Some of the configuration values stored for the previous device could not be
applied to device: arg1
Arguments arg1 = device name
Detailed
Description
Some of the configuration values stored for the previous device could not be
applied to the current device. This may be due to firmware version or other
differences in the part.
Recommended
Response
Action
Check the devices configuration and ensure that the new configuration is correct
for the system.
Category Configuration (PR = Part Exchange)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
1008