Reference Guide

the memory error on multi-bit ECC error. The memory device status and possible
memory module event cause information is provided.
Event ID — 1405
Description
Memory device status is <status>
Memory device location: <location in chassis>
Possible memory module event cause: <list of causes>
Severity Informational
Cause Memory device status is nonrecoverable. The memory module failed because of an
irrecoverable error.
Hardware Log Sensor Messages
The hardware logs provide hardware status messages to systems management software. On certain
systems, the hardware log is implemented as a circular queue. When the log becomes full, the oldest
status messages are overwritten when new status messages are logged. On some systems, the log is not
circular. On these systems, when the log becomes full, subsequent hardware status messages are lost.
Hardware log sensor messages listed provides status and warning information about the noncircular logs
that may fill up, resulting in lost status messages.
Event ID — 1550
Description
Log monitoring has been disabled
Log type: <Log type>
Severity Warning
Cause A hardware log sensor in the specified system is disabled. The log type information
is provided.
Event ID — 1551
Description
Log status is unknown
Log type: <Log type>
Severity Information
Cause A hardware log sensor in the specified system could not obtain a reading. The log
type information is provided.
Event ID — 1552
Description
Log size is no longer near or at capacity
49