Reference Guide

Explanation Specifies the peak value in Watts, for example: Peak value (in Watts):
1.693
Description
Line Item
Possible memory module event cause: <list of causes>
Explanation Specifies a list of possible causes for the memory module event, for example:
Possible memory module event cause:
Single bit warning error rate exceeded
Single bit error logging disabled
Description
Line Item
Power Supply type: <type of power supply>
Explanation Specifies the type of power supply, for example: Power Supply type: VRM
Description
Line Item
Previous redundancy state was: <State>
Explanation Specifies the status of the previous redundancy message, for example: Previous
redundancy state was: Lost
Description
Line Item
Previous state was:<State>
Explanation Specifies the previous state of the sensor, for example: Previous state was:
OK (Normal)
Description
Line Item
Processor sensor status: <status>
Explanation Specifies the status of the processor sensor, for example: Processor sensor
status: Configuration error
Description
Line Item
Redundancy unit: <Redundancy location in chassis>
Explanation Specifies the location of the redundant power supply or cooling unit in the chassis,
for example: Redundancy unit: Fan Enclosure
Description
Line Item
SD card device type: <Type of SD card device>
Explanation Specifies the type of SD card device, for example: SD card device type:
Hypervisor
Description
Line Item
SD card state: <State of SD card>
Explanation Specifies the state of the SD card, for example: SD card state: Present,
Active
26