Reference Guide

• Citrix XenServer 6.5

NOTE: Citrix XenServer 6.5 is not supported for OMSM (Dell OpenManage Storage Management)

NOTE: OM 8.1 release is supported on Dell’s 10th generation PowerEdge systems and later.

For more information on the supported operating systems, Network Interface Cards (NIC), and

PowerEdge RAID Controllers (PERC), see the Dell Systems Management Software Support Matrix at

dell.com/openmanagemanuals

Matrix Information Structure

The products on the left-hand side of the matrix are the main products under the various categories and

the products on the right-hand side of the matrix are the other products that are required by the main

product to function, or are compatible with the main product.

* Indicates that the product on the left-hand side is dependent on the particular

product version on the right-hand side.

NA Indicates that the product on the left-hand side is not dependent or not applicable

for the product on the right-hand side.

All Indicates all the versions of the software supported.

Naming Convention For Dell PowerEdge Systems

The naming convention used for Dell PowerEdge systems is as follows:

For the 13th generation of PowerEdge systems:

Type of Server Specifics

R indicates Rack

T indicates Tower

Overall Performance Generation Processor

1 to 5 : Low End Server

5 to 10 : High End Server

3 indicates Dell 13th

generation PowerEdge

servers

0 — Intel Processor

5 — AMD Processor

For example: Dell PE R730 is Rack , Dell 13th generation PowerEgde server.