Help

raidEnabled(8)
RAID redundant memory feature is enabled.
dddcCapable(16)
DDDC redundancy is enabled.
Table 1007. Physical Memory Logging Capabilities
Variable Name: DellPhysicalMemoryLoggingCapabilities
Data Type: Integer
Possible Data Values Meaning of Data Value
If set to 0 (zero)
There are no logging capabilities.
unknown Capabilities(1)
Logging capabilities are unknown.
The logging capabilities are:
enableCapable(2)
Logging enable/disable using Simple Network
Management Protocol (SNMP) is supported.
Table 1008. Physical Memory Logging Settings
Variable Name: DellPhysicalMemoryLoggingSettings
Data Type: Integer
Possible Data Values Meaning of Data Value
If set to 0 (zero)
There are no logging settings enabled. unknown
Capabilities(1)
Logging capabilities are unknown.
The logging settings are:
enabled(2)
Logging is disabled (0), or enabled (1).
BIOS Setup Control Group
Basic Input/Output System (BIOS) Setup Control Group variables provide information about the functions
that the BIOS performs in your system. This management information base (MIB) group includes variables
for the boot sequence, speakers, diskettes, ports, network interface controllers (NICs), and the Wakeup
on local area network (LAN) feature.
BIOS Setup Control Group Tables
The MIB tables in this group define the BIOS control of devices and controller cards that are typically
present in a system.
• BIOS Setup Control Table
• SCSI Control Table
• Parallel Port Control Table
• Serial Port Control Table
• USB Control Table
• IDE Control Table
• Diskette Control Table
273