Help

Description Defines the adapter speed in megahertz of the hot-plug system slot. A
zero (0) indicates that the slot speed is unknown.
Syntax DellUnsigned32BitRange
Access Read-only
System Slot Variable Values
This section includes definitions for server administrator-specific variable values used in this section.
Table 927. System Slot State Capabilities
Variable Name: DellSystemSlotStateCapabilities
Data Type: Integer
Possible Data Values Meaning of Data Value
systemSlotHotPlugIsUnknown (1)
The system slot’s capabilities are unknown.
systemSlotHotPlugIsHotPlug
gableCapable(2)
The system slot supports hot-plug.
systemSlotHotPlugCanBePower edOn(4)
The system slot power (and corresponding light-
emitting diode [LED]) can be powered on.
systemSlotHotPlugCanSignal Attention(8)
The system slot attention state (and corresponding
LED) can be set.
systemSlotHotPlugCanSignal
PowerFault(16)
Power on fault (and corresponding LED) can be
detected due to a short or overcurrent.
systemSlotHotPlugCanSignal
AdapterPresent(32)
Adapter (card) present in slot (may not be
powered) can be detected.
systemSlotHotPlugCanSignal
PowerButtonPressed(64)
The system slot power button can be pressed to
signal a toggle of the power state.
canSupportAllHotPlugCapabi lities(126)
The system slot can support all hot-plug
capabilities.
systemSlotHotPlugIsUnknown (1)
The system slot’s capabilities are unknown.
systemSlotCanProvide5Volts (128)
The system slot can provide a 5-volt (V) supply.
systemSlotCanProvide3Point 3Volts(256)
The system slot can provide a 3.3-V supply.
systemSlotCanSignalIfShared (512)
The system slot’s opening, if shared with another
slot, can be detected.
systemSlotCanSupportCard16 (1024)
The system slot can support PC Card-16.
systemSlotCanSupportCardBus (2048)
The system slot can support CardBus.
systemSlotCanSupportZoomVid eo(4096)
The system slot can support Zoom Video.
systemSlotCanSupportModem
RingResume(8192)
The system slot can support modem ring resume.
systemSlotCanSupportPMESig nal(16384)
The system slot can support Power Management
Enable (PME#) signal.
250