Help

Section Topics MIB Group Numbers
12 Port Group — defines variables for major port types such
as keyboard, monitor, small computer system interface
(SCSI), Universal Serial Bus (USB), and parallel and serial
ports
1000
13 Device Group — defines variables for pointing, keyboard,
processor, cache, memory, and personal computer
interface devices
1100
14 Slot Group — defines variables for the system’s slots 1200
15 Memory Group — defines variables for the system’s
physical memory
1300
16 BIOS Setup Control Group — defines variables for BIOS
functions such as boot sequence, speakers, Wake on the
local area network (LAN), diskettes, ports, and network
interface controllers (NIC)
1400
17 Local Response Agent Group — defines variables for
global settings and actions. These variables allow users to
predetermine how the system responds to a particular
type of event
1500
18 Cost of Ownership Group — defines variables for tracking
data on the system’s service contract, lease, repair
records, trouble tickets, and so on
1600
20 Cluster Group — defines variables for systems that
operate as a cluster
1800
21 Baseboard Management Controller Group — provides
information about the Baseboard Management Controller
(BMC) that may be present in your system. In addition to
providing general information about the BMC, this group
provides information about the serial and local area
network (LAN) interfaces of the BMC
1900
26 Traps — defines the types of alerts that can be sent to
report the status of critical components
5000
Server Administrator Remote Access MIB
NOTE: This section contains information that is applicable only if the Server Administrator is
installed in the system.
The Server Administrator Remote Access MIB ( filename dcs3rmt.mib ) provides in-band information
about remote access hardware that may be present in your system.
The Server Administrator Remote Access MIB structures its MIB objects into groups of scalar objects or
MIB tables that provide related information. Table below describes each Server Administrator Remote
Access MIB group and lists the MIB group number assigned to the MIB group. The Server Administrator
Remote Access MIB groups are identified by the SNMP OID 1.3.6.1.4.1.674.10892.1.<MIB group number>
where <MIB group number> is the MIB group number assigned to the MIB group. See the relevant section
for more information about the MIB objects defined in a MIB group.
10