Reference Guide

Server
Administrator
Trap ID
Not Applicable
PST0080
Message An issue was detected. System at boot F1/F2 prompt. Requires entry to continue.
Detailed
Description
System is at the F1/F2 prompt because the system BIOS detected an issue other
than "No bootable devices".
Recommended
Response
Action
Check post display screen for details. Press F1 to contine boot, or press F2 to go to
setup.
Category System Health
Subcategory PST = BIOS POST
Severity Severity 2 (Warning)
LCD Message System BIOS at F1/F2 prompt.
Initial Default
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
PST0081
Message No bootable devices.
Detailed
Description
System is at F1/F2 prompt because the system BIOS was unable to detect a
bootable device.
Recommended
Response
Action
Make sure a bootable device is attached to the system and enabled in BIOS setup.
If device is attached and enabled, remove and reapply power to server. If the
problem persists, contact your service provider. Refer to the product
documentation to choose a convenient contact method.
Category System Health
Subcategory PST = BIOS POST
Severity Severity 1 (Critical)
LCD Message No bootable devices found. Check bootable devices.
Initial Default
980