Reference Guide

Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
PR8
Message Device not detected: arg1
Arguments
• arg1 = device name
Detailed
Description
The indicated device has been removed from the system, is no longer functioning,
or has been disabled.
Recommended
Response
Action
If the part is present, make sure it is properly installed. Ensure that the device has
not been disabled in the system BIOS or other configuration utility. Contact
technical support if the device is still non functional.
Category Configuration
Subcategory PR = Part Exchange
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default LC Log
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
PR9
Message Firmware update operation initiated.
Detailed
Description
The Part Replacement feature started the firmware update process based on Part
Firmware Update attribute settings.
Recommended
Response
Action
No response action is required.
Category Configuration
Subcategory PR = Part Exchange
Severity Severity 3 (Informational)
969