Reference Guide

PR34
Message arg1 failed after exceeding retry attempt limit.
Arguments
• arg1 = job ID
Detailed
Description
The job was attempted but failed unexpectedly. An AC Power loss, system crash, or
other interruption during the job processing can cause this failure.
Recommended
Response
Action
Recreate and resubmit the job.
Category Configuration
Subcategory PR = Part Exchange
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default LC Log;None
Server
Administrator
Event ID
Not Applicable
Server
Administrator
Trap ID
Not Applicable
PR35
Message Power Supply slot arg1 firmware update will be performed during next system
reboot.
Arguments
• arg1 = PS slot number
Detailed
Description
The Part Replacement feature has detected a firmware difference for the power
supply and will start the firmware update process upon system reboot.
Recommended
Response
Action
No response action is required.
Category Configuration
Subcategory PR = Part Exchange
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default LC Log
965